Sega type twin F355 Owner's Manual download pdf (Page 103)

www.seuservice.com

TRUSS SCREW (2),black

UNLOCK

DROP CLOTH TO

PREVENT DAMAGE

19-1 REMOVING THE GD-ROM DRIVE

19. GAME BOARD

● In order to prevent electric shock and short circuit hazards, be sure to turn

power off before performing work.

● Be careful not to damage the wires. Damaged wires may cause electric shock

or short circuit or present a ﬁre risk.

● Do not expose the Game BD, etc. without a good reason. Failure to observe

this can cause electric shock hazard or malfunctioning.

Static electricity from your body may damage some electronics devices on the IC

board. Before handling the IC board, touch a grounded metallic surface so that the

static electricity can be discharged.

FIG. 19. 1

● Turn the power off.

● Remove 1 screw from each side of Base Lid R.

● Unlock the base with the Master Key.

● Turn the Lock Handle on Base Lid R to unlock the lid.

● Lower the seat towards the backrest. Slowly lower the backrest until it touches the ﬂoor to

prevent damage to the seat part. Put a drop cloth on the ﬂoor to prevent damaging the surface of

the seat part.

CAUTION!

WARNING!

* Note: Unit may differ from illustration.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 131 132

No comments

Sega type twin F355 Owner's Manual Page 103