Sega WaveRunner Owner's Manual download pdf (Page 49)

AIR DRIVE SYSTEM

In order to prevent an electric shock and short circuit, be sure to turn power off before per

forming work by touching the interior parts of the product.

Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or

shol

circuit accident.

Hot compressor can

cause

bums. After turning power off, wait until hot portions cool off to

start working.

Setting to an undesignated pressure can

cause

malfunctioning and trouble. Be sure to

use the

Perform dewatering periodically. Gathered water can have compressor load become greater

and cause malfunctioning.

When the set pressure is adjusted, be sure to check if the adiustment is

appropriate.

[

PRECAUTIONS TO BE HEEDED BEFORE STARTING WORK

Since a compressor is employed for this product, unless the power supply of the Air Drive is turned

off, the Ride can suddenly move and therefore, ensure that the power supply for the Air Drive is

turned off as per the following procedure before starting work.

Turn the Main SW of AC Unit OFF.

Take

out

the 2 Truss Screws to remove the Lower Lid of the Front Cabinet. When removing the

Lower Lid,

use

care so as not to damage the wiring inside the Lower Lid.

Turn the Circuit Protector inside the Lower Lid OFF.

Now, proceed to work.

CIRCUIT

PBopEcToR

FIG.

10.

I b

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

No comments

Sega WaveRunner Owner's Manual Page 49