Sega House of the Dead Owner's Manual download pdf (Page 49)

www.seuservice.com

To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and press the TEST

Button. When the data has been cleared, the message "COMPLETED" is displayed.

Press the TEST Button again to return to the NETWORK SETTING main screen.

Move the cursor to NO (CANCEL) and press the TEST Button to return to the NETWORK

SETTING main screen without clearing the data.

(D) NETWORK TEST

In this test, the checking for the communication network can be performed.

Entering this test mode, checking starts immediately.

The display changes to "GOOD" when the checking is nished successfully, and changes to

"BAD" when any problem is detected. If the connection is not permitted, the display will change

to "N/A".

If you perform this test immediately after the setting change, it may not display the correct result.

In this case, be sure to turn the power off and on, and enter this test mode again.

Use this to return all values in the NETWORK SETTING to the default values and turn off

network communication.

CLEAR NETWORK SETTING

->YES (CLEAR)

NO (CANSEL)

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

NETWORK TEST

VERSION *.**

STATUS GOOD

CHECKING 100%

**** MODE

CHECKING NETWORK

LOOPBACK - GOOD

GATEWAY -- N/A

SERVER --- N/A

-- COMPLETED --

PRESS TEST BUTTON TO EXIT

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

No comments

Sega House of the Dead Owner's Manual Page 49