Sega Jambo!Safari Owner's Manual download pdf (Page 28)

Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the

value of each V.R. on the Control Panel. Periodically check the status of each switch and V.R. on this screen.

7 -4 INPUT TEST

FIG. 7.4 INPUT TEST

By pressing each switch, if the display on the right-hand side

of the name of each switch changes to ON from OFF, the SW

and the wiring connections are satisfactory.

To check CHUTE 1 & CHUTE 2 coin switches, open the

COIN CHUTE DOOR and insert a coin(s) in the slot.

Press either the TEST BUTTON and the START BUTTON

to return to the test menu.

As a standard, refer to the following for each of the Volume’s

adjustment. By operating the Handle (Steering Wheel) and

Pedal, if the V of each Volume guage smoothly moves as the

corresponding value varies ina natural manner, then it is

satisfactory.

Choose OUTPUT TEST to cause the following lower screen

to appear. In this test, check the status of each lamp.

The right-hand side “ON” & “OFF” display of START

LAMP automatically alternates. The lamp lights up

when “ON” is displayed and goes off when “OFF” is

displayed. Check to ensure that the lamp lights up and

goes off in consistency with the display of “ON” and

“OFF”.

Press the TEST button to return to the TEST MENU.

FIG. 7.5 OUTPUT TEST

7 - 5 OUTPUT TEST

OUTPUT TEST

START LAMP OFF

>EXIT

PRESS TEST BUTTON TO EXIT

INPUT TEST

COIN CHUTE #1 OFF

COIN CHUTE #2 OFF

SERVICE OFF

TEST OFF

START OFF

LEVER UP OFF

LEVER DOWN OFF

HANDLE 7bH

ACCEL 3fH

BRAKE 33H

PRESS TEST AND SERVICE BUTTON TO EXIT

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

No comments

Sega Jambo!Safari Owner's Manual Page 28