Sega type twin F355 Owner's Manual download pdf (Page 25)

www.seuservice.com

INSTALLING THE AC COVERS (WIRING CONNECTION)

The AC cover is used for protecting the wiring and optic fiber cables. When performing the work,

be very careful so as not to cause damage by catching them. Pay due attention to handling optic

fiber cables in particular. Ensure not to cause breakage to the cables due to excessive bending.

 Before starting to work, ensure that the Power SW is OFF. Failure to observe

this can cause electric shock and short circuit hazards.

 Use care so as not to damage wirings. Damaged wiring can cause electric

shock and short circuit hazards.

Attach AC COVER A to the back of the cabinet (Fig. 6.4) by securing with 5 screws.

Make wiring connections between both cabinets & the coin chute tower. Insert the supplied

wiring connectors to the corresponding ones which have an identical color and the same number

of pins.

Insert the optic fiber cables to the optic fiber connectors in a manner as applicable. There are

"TX" and "RX" connectors. Make sure to connect the "TX" connector of one cabinet to the

"RX" connector of the other cabinet (see Sec. 20).

Secure the wiring and optic fiber cable with cord clamps in AC COVER A.

Install AC COVER B. Insert AC COVER B to AC COVER A from above and secure with 4

screws.

AC COVER B

AC COVER A

SCREW (2) black

M4 X 8, w/flat &

spring washers

SCREW (5) black

M4 X 8, w/flat & spring washers

FIG. 6. 4

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 143 144

No comments

Sega type twin F355 Owner's Manual Page 25