Sega Satellite TV System Owner's Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Connecting Your TV
There are various types of TV sets and antenna terminals. Compare your TV to the illustrations below to decide which
procedure is necessary.
TV (or VCR) with Video and Mono Audio Input
Jacks
If your TV has Video and Mono Audio Input Jacks
(usually on the back of recent models), you can use the
supplied Sega Audio/Video Cable.
1. Insert the single-plug end of the Audio/Video
Cable in the AN OUT Jack on the Genesis 32X.
2. Insert the yellow plug of the Audio/Video Cable
into the composite TV or monitor's Video IN Jack
(or into the VCR Video IN Jack). Insert the white
plug into the TV or monitor's Audio IN Jack (or
into the VCR Audio IN Jack).
3. Select the Audio/Video Input setting on your TV
(or VCR) when playing the Genesis 32X.
4. To continue, see "Powering Up the System."
TV without Audio/Video Inputs
If a single-plug Antenna Cable is plugged into your TV
(or if you have Cable TV), use the Sega RF Unit which
is included in your Genesis package.
Note: The RF Unit comes with the new Genesis
model only. The Sega Auto RF Switch Box for the
original Genesis model CANNOT be used. To
purchase a Sega RF Unit (Model No. 1632), contact
your Sega dealer.
1. Unplug the Antenna Cable from the TV, and plug
it into the RF Unit.
2. Plug the RF Unit Antenna Cable into the TV.
3. Plug the RF Cable into the AV OUT Jack on the
back of the Genesis 32X.
4. To set the channel on your TV, see "Setting the
TV Channel" in your Genesis or RF Unit
instruction manual.
5. To continue, see "Powering Up the System."
Note: Connecting the Genesis 32X to the TV is the same as connecting the Genesis to the TV. If your TV isn't
mentioned above, see your Genesis instruction manual.
Powering Up the System
1. Connect the AC Adaptor Plug to the Adaptor Jack
on the back of the Genesis (or Genesis CDX) and
Genesis 32X unit.
2. Plug the AC Adaptors into the electrical outlet or
the Sega Power Strip. When you are using the
Sega CD, plug its AC Adaptor into the electrical
outlet also.
Caution: When using the Sega CD, there are three
types of AC Adaptors, so take considerable care when
connecting.
Page view 4
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments