Sega Crazy Taxi Owner's Manual

1st PRINTING March 99MANUAL NO. 4201-6468-01STD VERSIONOWNER’S MANUALOWNER’S MANUALOWNER’S MANUALOWNER’S MANUALOWNER’S MANUALSEGA ENTERPRISES, INC.

5PRECAUTIONS TO BE HEEDED DURING OPERATIONTo avoid injury and accidents, those who fall under the following catagories are notallowed to play the game

62 . NAME OF PARTSGAME SPECIFICATIONSWHEN ASSEMBLEDWIDTH in. LENGTH in. HEIGHT in.WEIGHT lbs.550 LBS.~ 600 LBS. All measurements are and rounded UP39”

73 . ACCESSORIES

8“CHECK SIDE” DisplayFILTER BOARDCARTON BOX601-8928 (1)Used for transporting the GAME BOARD.{SUPPLIED WITH YOUR GAME} DO NOT SHIP GAME BOARD WITHOUTTH

94 . ASSEMBLING AND INSTALLATIONNote that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm widthacross flats are requi

101Install the coin chute tower on the Right-hand side of cabinet. Open the coin chute door and the cashbox door tosecure with the 4 hexagon bolts fro

112ASSY OF THE BILLBOARDMount Billboard on cabinet by ensuring the front lip of the Billboard is securely placed under the mounting bracketalready ins

12 SECURING IN PLACE (ADJUSTER ADJUSTMENT)Move the machine to the installation position.Cause all of the leg levelers to make contactwith the floor. B

13POWER SUPPLYTurning the AC unit’s main switch on will cause the machineto start the power check and network check automatically.In the Power On chec

14Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically.The game board is satisfactory if the d

WarrantyYour new Sega Product is covered for a period of 90 days from the date of shipment. This certifiesthat the Printed Circuit Boards, Power Supp

15C.R.T. TEST 1/2 RED GREEN BLUE WHITEPRESS TEST BUTTON TO CONTINUEIn the TEST mode menu, selecting C.R.T. TEST allows thescreen (on whi

16When moving the machine, be sure to pull out the plug fromthe power supply. Moving the machine with the plug as isinserted can damage the power cord

176 . CONTENTS OF GAMEThe following explanations apply to the case the product is functioning satisfactorily. Should there be any movesdifferent from

182341Insert a coin.Coin insertion causes credit(s) to be displayed on the screen. For example, in the case of 2 coins one creditsetting, “INSERT COIN

19The following explains as regards how to earn FARE (or score points).The minimum fare is earned at the time the taxi picks up the Customer.Basically

20INSTALLATIONOF MACHINE7 - 62. In the INPUT TEST mode, check each SW and VR.3. In the OUTPUT TEST mode, check each of lamps.4. In the MEMORY TEST mod

21Open COIN CHUTE DOOR, and the switch unit shown appears. The function ofeach switch is as follows:7 - 1 SWITCH UNIT AND COIN METERNever touch place

22 7 - 2 SYSTEM TEST MODEThe contents of setings chnaged in the TEST mode are stored when the TEST modeis finished from EXIT in the MENU mode. If the

23Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and thevalue of each V.R. on the Control Panel. Per

24This test mode allows each sound related board andspeaker to be checked.Press the Service Button to select the sound to be tested,and press the Test

VISIT OUR WEBSITE!

257 - 8 VOLUME SETTINGFIG. 7.8 VOLUME SETTINGVOLUME SETTINGHANDLE SETTING AD0:78HCENTER 78HLEFT MAX 1aH <----> a4H RIGHT MAXACCEL SETTING AD1:3

267 - 9 GAME ASSIGNMENTSSelecting the GAME ASSIGNMENTS in the MENU mode causes the present game settingsto be displayed and also the game settings c

27The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbersof coins and credits. This mode expresses “h

28TABLE 7.10a COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE)SETTING FUNCTIONING OF CHUTE#1SETTING #1 1 COIN 1 CREDITSETTING #2 1 COIN 2 CREDITSSETTING

29MANUAL SETTINGSelecting MANUAL SETTING in the COIN ASSIGNMENTS mode displays the following screen.FIG. 7.11b MANUAL SETTINGBONUS ADDER NO BONUS ADDE

30Clears the contents of BOOKKEEPING and highscore player ranking entry.When clearing, bring the arrow to “YES” and whennot clearing, to “NO”, by usin

318. HANDLE MECHAIn order to prevent an electric shock and short circuit, be sure to turn power offbefore performing work by touching the interior par

3212Turn off the power.Disconnect the connector.Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket.Take out the 2 scr

338 - 3 GREASINGNever touch places other than those specified. Touching places not specified cancause electric shock and/or short circuit.After the re

34In order to prevent electric shock and short circuit, be sure to turn off the powerbefore performing work on the interior parts of the product.Be ca

359 - 2 SWITCH REPLACEMENTEach microswitch is secured with 2 screws. Remove the 2 screws and replace the Microswitch.After replacing the Switch, chec

36In order to prevent an electric shock and short circuit, be sure to turn power offbefore performing work by touching the interior parts of the produ

3712Take out the 2 truss screws and remove the Front Coverfrom the Accel. & Brake unit.Loosen the screw which secures the Potentiobase, andadjust

38The coin selector should be cleanedonce every 3 months. When cleaning,follow the procedure below:Turn the power for the machine OFF.Open the coin ch

39OPTIONAL DOLLAR BILL ACCEPTORTHE COIN DOOR ASSEMBLY USED ON CRAZY TAXI CRAZY TAXI CRAZY TAXI CRAZY TAXI CRAZY TAXI COMESEQUIPPED TO ACCEPT A DOL

40

4112. MONITORWhen performing such work as installing and removing the monitor, inserting and disconnect-ing the external connectors to and from monito

42For the purpose of static prevention,special coating is applied to the CRTface of this product. To protect thecoating, pay attention to the followin

43

4413. REPLACEMENT OF FLUORESCENT LAMPWhen performing the work, be sure to turn power off. Workingwith power on can cause an electric shock or short ci

INTRODUCTION OF THE OWNERS MANUALGENERAL PRECAUTIONS1. PRECAUTIONS TO BE HEEDED FOR OPERATION2. NAME OF PARTS3. ACCESSORIES4. ASSEMBLY AND INSTALL

45The items listed below require periodic check and maintenance to retain the performance ofthis machine and ensure safe operation.14. PERIODIC INSPEC

4615. TROUBLESHOOTINGPROBLEMS CAUSE COUNTERMEASURESWith Main SW Power is not supplied. Plug in correctlyON, no activationPower supply/voltage is not c

4716. GAME BOARDIn order to prevent an electrical shock, be sure to turn power off beforeperforming work by touching the interior parts of the produc

48Incline the Seat and remove the Base Lid to view the Base interior. The composition of the Base interior is as shownbelow. There is a fuse on each o

4916 - 3 COMPOSITION OF GAME BOARDASSY CASE NAO USA (840-0002D-01) :USADIP SW SETTINGIN the product, set all of the DIP SWes to OFF.Ensure that the

5017. DESIGN RELATED PARTSITEM NO. PART NO. DESCRIPTION1 DYN-0011 DENOMI PLATE W/O ORIGINAL2 LOCAL PURCHASE DENOMINATION SHEET 1 GAME6 999-0771 STICK

5118. PARTS LISTTOP ASSY CRAZY TAXIITEM NO. PART NO. DESCRIPTION1 999-0774 ASSY BILLBOARD CTA2 DUT5-0300 ASSY COIN CHUTE TOWER3 999-0774 ASSY COCKPIT

52ASSY BILLBOARD STD (999-0774)ITEM NO. PART NO. DESCRIPTION1 999-0761 MARQUEE PLEX CRAZY TAXI2 999-0733 LOWER MARQUEE GRILL3 999-0731 MARQUEE COVER L

53ITEM NO. PART NO. DESCRIPTION1 DRT5-0231 LAMP HOLDER101 999-0734 ASSY YELLOW LAMP COVER201 000-T00408-0C M SCR TH CRM M4X8202 068-441616-0C FLT WSHR

54ASSY COINCHUTE TOWER (DUT5-0300)

1SPECIFICATIONSInstallation space: 68 in.(L) x 41 in.(W)Height: 84 in.Weight: Approx. 550 lbs.Power maximum current: 3.5 Amp AC 120V 60 HzMONITOR: 29”

55ITEM NO. PART NO. DESCRIPTION1 SPG1-0350 SW UNIT2 SPG1-0301 COIN CHUTE TOWER3 DYN-0302Y COIN METER BRKT4 DP-1167 TNG LKG5 BOX-CASH CASH BOX10 DYN-03

56SW UNIT (SPG5-0350)ITEM NO. PART NO. DESCRIPTION1 SPG5-0351 SWITCH BRKT101 509-5028 SW PB 1M102 220-5179 VOL CONT B-5K OHM103 601-0042 KNOB 22MM104

57AC UNIT (DRT1-0400)TEM NO. PART NO. DESCRIPTION1 SPG5-0401 AC BRKT101 600-5843-25 CA & PLUG ASSY 15A W/F-L=2.5M102 280-5134-6N34 BUSHING STRAIN

58ASSY MONITOR COVER R 1P (DRT5-1045)ITEM NO. PART NO. DESCRIPTION1 DRT5-1046 COVER PANEL R 1P

59ASSY MONITOR COVER L 1P (DRT5-1030)ITEM NO. PART NO. DESCRIPTION1 DRT5-1031 COVER PANEL L 1P

60ASSY SPEAKER (SPG-1100)ITEM NO. PART NO. DESCRIPTION1 INY-1701 SPEAKER BRKT101 130-5159 GULL BOX SPEAKER 8OHM 5W

61ASSY VIRTUAL BUTTON TWIN (DRT5-1290)ITEM NO. PART NO. DESCRIPTION1 DRT5-1291 VR BUTTON BRKT2 171-6478B PC BD LIGHTING SW101 212-5205-12 CONN JST M 1

62ASSY BASE BOX (DRT1-1500)ITEM NO. PART NO. DESCRIPTION1 DRT1-1501 MAIN BASE2 DYN-2003 BASE LID F3 DYN-2004 LOCK TNG4 DYN-2005X FLOOR MAT5 DYN-2006 H

63MAIN BASE (DRT1-1501)ITEM NO. PART NO. DESCRIPTION1 DYN-2002X-A MAIN BASE BLANK2 999-0769 STICKER BASE L3 999-0768 STICKER BASE R4 999-0167 LEG ADJU

64ASSY SEAT TWIN 1P (DRT-1600)

2General PrecautionsFollow Instructions: All operating and use instructions should be followed.Attachments: Do not use attachments not recommended by

65ITEM NO. PART NO. DESCRIPTION1 STC-1650 ASSY WOOFER2 DRT-1602-A UPPER SEAT3 DRT-1603-A LOWER SEAT4 STC-2201 SEAT BASE5 STC-1604 SEAT FRAME6 DRT-1604

66ITEM NO. PART NO. DESCRIPTION1 STC-1651 WOOFER BRKT F2 STC-1652 WOOFER BRKT R101 130-5160 SUB WOOFER 4 OHM 30WASSY WOOFER (STC-1650)

67ASSY ACCEL&BRAKE (SPG-2200)

68ASSY ACCEL&BRAKE (SPG-2200)ITEM NO. PART NO. DESCRIPTION1 SPG-2201 BASE2 SPG-2202 ACCEL PEDAL3 SPG-2203 BRAKE PEDAL4 SPG-2204 ACCEL SPRING5 SPG-

69ASSY HANDLE MECHA (CTA-2100)

70ASSY HANDLE MECHA (CTA-2100)ITEM NO. PART NO. DESCRIPTION1 CTA-2101 HANDLE BASE2 CTA-2101 BASE LID3 CTA-2103 HANDLE SHAFT4 CTA-2104 STOPPER BOLT5 CT

71ASSY SHIELD CASE NAO (840-0002D-01)ITEM NO. PART NO. DESCRIPTION1 840-0001A-01 SHIELD CASE CTA NAO USA2 840-0001C ROM CASE NAO

72ASSY ELEC BASE (CTA1-4500)ITEM NO. PART NO. DESCRIPTION1 NOT AVAILABLE WOODEN BASE ELEC101 560-5360-01 XFMR 12.8V 6.3A 34V 4.2A102 LOCAL PURCHASE FU

73ASSY COCKPIT 1P (DRT1-10001)

74ITEM NO. PART NO. DESCRIPTION1 DRT5-20001 ASSY MAIN BASE 1P2 DRT5-1030 ASSY MONITOR COVER L 1P3 DRT5-1045 ASSY MONITOR COVER R 1P4 DRT5-1201 ASSY CO

3Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safetychecks to determine that the pro

75ASSY CONTROL PANEL (DRT1-1200-02)

76ASSY CONTROL PANEL (DRT1-1200-02)ITEM NO. PART NO. DESCRIPTION1 DYN-1201 STEERING WHEEL2 DYN-1209X HANDLE COLLAR3 SPG-2002 STEERING EMBLEM4 DRT1 -12

77ASSY MAIN BASE 1P (DRT5-20001)

78ITEM NO. PART NO. DESCRIPTION1 DRT-1500 ASSY BASE BOX2 DRT-1600 ASSY SEAT TWIN 1P3 SPG-2200 ASSY ACCEL&BRAKE5 CTA1-4500 ASSY ELEC BASE6 SRT1-040

4In order to avoid accidents, check the following before starting the operation:Check if all of the adjusters are in contact with the surface. If they